Repairs to uPVC Windows
uPVC is an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as aluminum or timber.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs as well as increase energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it can cause a great amount of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good condition.
Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance, you will need to locate some plastic spacers to help the new pane to fit properly into the window frame.
Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor and could be trampled under.
Once the glass is removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent drafts and water from entering the property until a professional is able to come out and fix the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap between the window and the door is large, you might prefer security screens that includes windows. This will provide the best of both.
2. Sagging
Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. In time, they could develop a number of problems, including sagging. A sagging uPVC window can cause problems with light, draughts and even security. It's crucial to act immediately if you realize that your uPVC windows are falling down.
Repositioning the hinges could aid in fixing a window that is sliding. First, you'll need to unblock the windows so you can get at the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and test it for fitting. If you're satisfied with the fit of the window, tighten the screws to secure them in place.
If you are unable to move the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loosen. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.
UPVC handles can also loosen. This is usually due to screws that have been removed over time, but it could also be caused by the handle mechanism wearing out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to shut the window and then perform a test fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into the position it was in.
3. Water Leaks
It is crucial to take action if wake up every morning to find a smoky wall and wet floors. Windows that leak water do can not only cause degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.
This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer of caulk can be put on. When it is time to uPVC repair, you must be careful not to over-caulk. This will make your window harder to clean and lower its energy efficiency.
It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe instances, you may need to replace the window.
Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread throughout the home.
It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. window repairs near me
If your uPVC windows are stiff to open, or slack and open with a breeze it could be the hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.
Like any mechanical component, hinges can be damaged over time. It is very easy to replace a hinge on a window however it is easier if someone else helps you to hold the frame.
Check that the uPVC hinges are closed and open in the right direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should open.
The problem with the hinges on windows can be caused by incorrectly opening the window in a certain manner or because of poor installation at the factory. Sending us a photo via our website will often solve the issue. We are always happy to offer advice.
Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It also decreases the chance of windows sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different things. First, the hinges due to wear and tear could become misaligned. This causes gaps to develop between the sash and the frame. These can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to have them realigned or replaced. In addition, the interlock could also become unbalanced. This happens on the hinge side and might require to be cleaned. In some instances it might be necessary to replace the hinges.
These seals can wear down or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will lessen draughts.
One of the most effective methods to reduce drafts is to use an draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be put on the windowsill on top. They will keep your home warm by blocking cold air.
Your upvc windows can remain a great source of insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more efficient to replace them than repair them. If you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional immediately.